The Trimapanel® flat system complies with the minimum requirements of the Conservation of Fuel and Power sections of the Building Regulations, Approved Document Part L2, England and Wales and Technical Handbook – Scotland. The panel construction offers highly consistent insulation performance, and the site-formed junctions provide a practical and effective method of ensuring good thermal performance.
|Thickness (mm)||U-value (W/m2K)*|
*Tata Steel figures computer modelled in accordance with EN ISO 10211, as stated in MCRMA Technical Note 14.
The Trimapanel® flat system has been tested to LPS1181-1 and is LPCB approved to both Grades EXT-B and EXT-A. Fire resistance performance of 15 mins insulation and 4 hours integrity is also achievable with enhance fixing and methods, contact the technical department for details. The internal surface of the panel complies with Class ‘O’ in accordance with the Building Regulations when tested to BS 476 Parts 6 & 7 and also achieves a Class B s2 rating in accordance with EN 13501-1.
Following rigorous structural and fire performance testing with FM Global, Trimapanel® flat panels have achieved FM Approvals certification to the following stringent standards:
4480: Class 1 Insulated wall and ceiling panels
4481: Class 1 Exterior wall systems (unlimited height)
Specifying and installing FM Approved products will provides assurance that the products have been objectively tested and confirm to the highest international standards. FM Approved roof and wall panel’s means you can be confident that your building envelope will withstand a broad range of fire and environmental risks, and be safe throughout its lifecycle.