Building Envelope Colorcoat Urban® Clamp

Colorcoat Urban® Clamp

Designed to complement and work with the Urban Seam®

Colorcoat Urban® supply a range of accessories designed to complement and work with the Urban Seam® profile including fixings such as nails and colour matched screws and rivets; breathable membrane, and ventilation products.

Our accessories can be incorporated as part of a new installation or retrofitted at a later date.

Colorcoat Urban® Clamp
A unique fixing arrangement specifically designed for securing proprietary Snowguards, PV arrays and ManSafe systems to metal roofing. The special clamps allow the systems to be securely fixed without any penetration of the roofing.

The Colorcoat Urban® Clamp is supplied with one M8 bolt and on set-screw.

Load test results based on pulling load normal to seam.

Colorcoat Urban® Clamp

Profile Screw Tension (Nm) Allowable (KNs) Ultimate (KNs)
Urban® Seam 13 1.5 4.51

For the maximum holding strength, set-screws should be tensioned to a pre-determined torque setting.

Wind Uplift deflection values
Specification of the 305mm/514mm wide panel is dependant on location, wall height, storey height and roof pitch. A structural engineer should complete a wind uplift calculation for your specific area before making any final decision.

Roof pitch (degree) and wallNo. storeysWind speed V2Panel width 305mmPanel width 514mm
(5-9) <3 ≥25 Y N
(5-9) 4 - 6 ≥25 Y N
(5-9) <3 <25 Y Y
(5-9) 4 - 6 <25 Y N
(≥10) <3 ≥25 Y Y
(≥10) 4 - 6 ≥25 Y N
(≥10) <3 <25 Y Y
(≥10) 4 - 6 <25 Y Y

Looking for help and advice with your designs?

The Colorcoat Urban® team of experts is available to offer the support you need and provide you with more detailed information on any of our Colorcoat Urban® range of products.

Whether you are looking for a more detailed drawing or a copy of our Specification guide contact the team on T: +44 (0) 1244 892449 or E: Colorcoaturban@tatasteel.com.

Duo ridge

Colorcoat Urban® duo ridge roof is one of the most popular designs ideal for traditional domestic buildings. The duo ridge design slopes in two different directions down from the ridge, and can be designed to suit your required style or shape.

Mono ridge

Colorcoat Urban® mono ridge roof is a single sloping free-standing surface. The mono ridge design slopes in one direction down from the ridge. It is both modern and contemporary and offers the perfect solution for new builds or additions to existing roofs.

Lean-to

Colorcoat Urban® lean-to roofs are fixed to an exterior wall of the building, providing small ground floor extensions and additional covered roofing space. The lean-to design is a simple, traditional concept which can be built entirely to suit you, as part of a new build or an extension to an existing structure.

Dormer

Colorcoat Urban® dormer roofs can be created with pitches as low as 5 degrees. Urban Seam® dormers can be designed for inclusion at construction stage or as a later addition to your build. Available to suit a wide range of shapes and sizes to suit pitched, flat or even the most difficult of dormer shapes. So versatile is the dormer that it is easily integrated with existing tiled roofs.

To obtain a no-obligation, fully itemised estimate speak with one of our Colorcoat Urban® experts

Our team are on hand to provide estimates, samples and advice on the performance and most suitable system for your project. In addition our dedicated team can provide comprehensive support at every stage of your project.

For further information contact:

General Enquiries:

T: +44 (0) 1244 892449
E: colorcoaturban@tatasteel.com

Technical Enquiries:

Aled Dafydd
T: +44 (0) 1244 892446
E: Colorcoaturban@tatasteel.com

Sales – Scotland, North West and North East England:

Ryan Wardle
T: +44 (0) 1244 892459
M: 07774 189424
E: ryan.wardle@tatasteel.com

Sales – North Wales, Midlands, East Anglia, London, Northern Ireland and Republic of Ireland:

Gordon Crichton
T: +44 (0) 1244 892455
M: 07736 899592
E: Gordon.crichton@tatasteel.com

Sales – South Wales, South East and South West:

Elen Worthington
T: +44 (0) 1244 892443
M: 07919 305281
E: elen.worthington@tatasteel.com

Our hand samples can assist in colour selection and finalising product specification.

Order samples online for Colorcoat Urban®
Please select your chosen Colorcoat Urban® colour to request samples. Or order samples by contacting the Colorcoat Urban® team on +44 (0) 1244 892449.


Producten downloads

Registreer of  om toegang te krijgen tot de beveiligde downloads.

cover-test-150.jpg
spec image.jpg

Registreer of  om toegang te krijgen tot de beveiligde downloads.

install guide.jpg

Registreer of  om toegang te krijgen tot de beveiligde downloads.




Dutch We hebben automatisch uw taalinstellingen gedetecteerd