Fitout Advantica® Lighting

Advantica® Lighting

Pre-finished steel for lighting applications

Advantica® is a range of pre-finished steel products specifically formulated for the manufactured goods sector. The result of almost 40 years experience, the Advantica® product range can provide superior solutions to best meet your needs.

Tata Steel manufactures high reflectivity pre-finished steel products specially formulated for light fittings including gear trays and box sections for fluorescent tube lights, reflectors and luminaire light fittings in commercial buildings.

All Advantica® Lighting products are supplied with a white reflective surface and can be produced with a variety of shades and coating systems to the reverse. They can be supplied on a variety of substrates.

Our wide product range can be used for applications including; commercial, industrial and domestic lighting. Tata Steel can help you make the right decision for your design.

Advantica® LightingAdvantica® F Heat (H)

EN F Heat var.jpg

Advantica® F Heat

A pre-finished steel product with excellent heat resistance

Applications
•  Lighting and HEVAC

Characteristics
•  Very good heat performance
•  Smooth surface appearance

Substrates available
•  Hot-dip galvanised to EN 10346
•  Cold reduced to EN 10130

Options
•  Alternative backing coats available
•  Protective film

Advantica® F Heat

Typical properties   Test specification
Nominal
coating thickness
μm 25 EN 13523-1
Specular gloss (60°) GU

50-60

EN 13523-2
Adhesion on bending T 0 EN 13523-7
Flexibility
(minimum bend radius)
T 3 EN 13523-7
Pencil hardness   F EN 13523-4
Scratch resistance g >1800 EN 13523-12
Abrasion resistance
(Taber, 250 rev.
1kg, CS10 wheels)
mg <30 EN 13523-16

Corrosion resistance:
Neutral salt spray

Hours 360 EN 13523-16

Corrosion resistance:
Humidity resistance

Hours 1000 EN 13523-26
Resistance to accelerated
ageing by use of heat
 

Delta E <0,5 at 200 hours 120oC
Delta E <1 at 3 hrs 180oC
Flexibility: max 1T loss after both ageings

EN 13523-13

Notes

The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further
information.

Corrosion and humidity performance subject to specification such as minimal metallic coating weight.


Product Downloads

Please Register or  to gain access to locked downloads.

Advantica GH datasheet Brochure Image.jpg



English We have automatically detected your language settings