Fitout Advantica® for HEVAC

Advantica® for HEVAC

Pre-finished steel products are used extensively in the heating, ventilation and air conditioning industry. Applications include; ventilation ducts, boilers, radiators and air conditioning units.

We produce flexible, waterproof products manufactured to suit both the processing requirements and end use without damaging the product.

Advantica® for HEVACAdvantica® F Heat

EN F Heat var.jpg

Advantica® F Heat

A pre-finished steel product with excellent heat resistance

•  Very good heat performance
•  Smooth surface appearance

Substrates available
•  Hot-dip galvanised to EN 10346
•  Cold reduced to EN 10130

•  Alternative backing coats available
•  Protective film

Advantica® F Heat

Typical properties   Test specification
coating thickness
μm 25 EN 13523-1
Specular gloss (60°) GU


EN 13523-2
Adhesion on bending T 0 EN 13523-7
(minimum bend radius)
T 3 EN 13523-7
Pencil hardness   F EN 13523-4
Scratch resistance g >1800 EN 13523-12
Abrasion resistance
(Taber, 250 rev.
1kg, CS10 wheels)
mg <30 EN 13523-16

Corrosion resistance:
Neutral salt spray

Hours 360 EN 13523-16

Corrosion resistance:
Humidity resistance

Hours 1000 EN 13523-26
Resistance to accelerated
ageing by use of heat

Delta E <0,5 at 200 hours 120oC
Delta E <1 at 3 hrs 180oC
Flexibility: max 1T loss after both ageings

EN 13523-13


The figures contained in this table are typical properties and do not constitute a
specification. If forming pre-finished steel below 16°C please consult Tata Steel for further

Corrosion and humidity performance subject to specification such as minimal metallic coating weight.

Product Downloads

Please Register or  to gain access to locked downloads.

HEVAC datasheet Brochure Image.jpg

English We have automatically detected your language settings