Pre-finished steel Colorcoat® PE 25

Colorcoat® PE 25

The cost effective pre-finished steel for undemanding applications

Colorcoat® PE 25 is an economic product suitable for undemanding roof and wall applications particularly in non-aggressive environments.

Pre-finished steel cladding
Colorcoat® PE 25 is suitable for wall cladding systems, profiles and panels, and can be used as an economical alternative for roofing applications in non-aggressive environments.

As an additional option Colorcoat® PE 25 is also available with Absorb®, a condensation regulating product delivered ready for profiling.

  • Smooth 25μm polyester coating.
  • Galvanised substrate with Zinc or MagiZinc® metallic coating offering very good corrosion resistance.
  • Available in the most popular cladding colours.
  • High-performance reverse side backing coat specially formulated for use in construction applications.

Colorcoat® PE 25 is carefully manufactured in a controlled process to ensure consistent quality. Colorcoat® PE 25 is suitable for wall cladding systems, profiles and panels, and can be used as an economical alternative for roofing applications in non-aggressive environments.

Colorcoat® PE 25 is available in different textures with increased flexibility, double sided or matt options.

The use of Colorcoat® PE 25 in distinctly marine and heavily industrialised environments is not recommended. Tata Steel has a range of Colorcoat® pre-finished steel products suitable for different environments and applications.

Properties  Test Standard
Nominal organic
coating thickness
μm* 25 EN 13523-1
Specular gloss (60°) % 30 - 50 EN 13523-2
Abrasion resistance
(Taber, 250 rev,
1 kg, CS10 wheels)
mg < 30 max. EN 13523-16
Flexibility:
Minimum bend radius
T 3T EN 13523-7
Adhesion % 100% Pass EN 13523-6
Corrosion resistance:
Salt spray
hours 360 EN 13523-8
Corrosion resistance:
Humidity
hours 1000 EN 13523-26
Corrosion resistance
category
  RC3 EN 10169:2010
UV resistance category   Ruv3 EN 10169:2010
Reaction to fire   A1 EN 13501-1

*μm = micron

General notes
1. The figures contained in this table are typical properties and do not constitute a specification.
2. To meet the corrosion resistance properties, a zinc weight of Z275 or MagiZinc® ZMA140 gr/m2 applies. On request Z225 can apply as minimum coating weight.

A fit for purpose guarantee is available. The actual duration of the guarantee will depend on the environment, geographic location and application.


Product Downloads

Please Register or  to gain access to locked downloads.

Colorcoat-PE25-datasheet.jpg



English We have automatically detected your language settings