Panels and Profiles
RoofDek - Structural roof decking Load/Span tables
The tables are based on a total ‘Dead & Super’ imposed load of 1.50kN/m2, a line load of 2.00kN/m and a deflection limit of L/200. The factor of safety used is 1.5. Where actual design loads exceed these, the spans must be reduced. Subject to satisfactory fixings, the decks will resist wind uplift to at least the value of 1.50kN/m2, and a and a deflection limit of L/90.
D46 Load/Span Tables (Eurocode)
D46 Load/Span Tables for Colorcoat®, Plain Steel and Aluminium.
Download
RoofDek D46 Plain Steel
Download
RoofDek D46 Plain Steel (Perf)
Download
RoofDek D46 Colorcoat®
Download
RoofDek D46 Colorcoat® (Perf)
Download
RoofDek D46 Plain Aluminium
Download
RoofDek D46 Aluminium (Perf)
RoofDek D60 Load/Span Tables (Eurocode)
Load/Span Tables for Colorcoat®, Plain Steel and Aluminium.
Download
RoofDek D60 Plain Steel
Download
Roofdek D60 Plain Steel (Perf)
Download
RoofDek D60 Colorcoat®
Download
RoofDek D60 Colorcoat® (Perf)
Download
RoofDek D60 Plain Aluminium
Download
RoofDek D60 Aluminium (Perf)
Contact
Shotton
Deeside
Flintshire
CH5 2NH
United Kingdom
T +44 (0) 845 30 88 330
F +44 (0) 845 30 11 013
E sales.theworks@ tatasteel.com
E technical.theworks@ tatasteel.com
